Exploring the potential of cyanobacteria to produce extracellular polymeric substances
Publication Date
July 27, 2026
Creator
Steffen, Christine
Aalborg University, MELiSSA Pilot Plant, Technical University of Denmark, University of Nottingham, Wageningen University & Research
Abstract
Cyanobacterial extracellular polymeric substances (EPS) are natural compounds with potential for various biotechnological applications, due to their versatile properties, including emulsifying, flocculating, gelling, and bioactive effects (e.g., antiviral, antimicrobial, immunomodulatory). The aim of this PhD thesis was to attain an economically feasible EPS production process with cyanobacteria. The research focused on screening novel cyanobacterial species regarding their EPS production, optimisation of cultivation conditions of the most promising species, scaling up EPS production in 1-litre photobioreactors (PBR), and assessing the profitability of an industrial-scale EPS production process by performing a techno-economic assessment.
During the microbial selection, the majority of the 15 novel cyanobacterial species were found to produce considerable amounts of EPS (up to 1.79 ± 0.15 g L-1 (n=2) after 60 days). Subsequent EPS characterisation revealed the presence of sulphate, rare monosaccharides (such as fucose and rhamnose), pentoses (arabinose, xylose) and glucuronic acid. EPS properties analysis of the seven most efficient species was performed, revealing that the EPS exhibited flocculating, emulsifying, UV-protective, metal-chelating and antioxidant properties. The results of the emulsifying assay were noteworthy, as three species reached emulsifying activities above 64%, which was similar to the synthetic emulsifier Tween20 (64 ± 1%, n=3), and 2-fold higher than xanthan gum (26 ± 1%, n=3). Two species with emulsifying properties were selected for culture condition optimisation: Calothrix brevissima, which reached the highest EPS concentration in the screening experiment, and Nostoc foliaceum, which contained the highest amount of the deoxysugar fucose.
Phototrophic single-factor optimisation of light intensity increased the EPS concentration of C. brevissima to 1.72 ± 0.14 g L-1 (n=2) on day 21, doubling the EPS productivity to 81.1 ± 6.6 mg L-1 d-1 (n=2) compared to the screening experiment. Mixotrophic multi-factor optimisation of light intensity, temperature and glucose concentration increased the concentration to 2.65 ± 0.07 g L-1 (n=2) on day 14, which represented a six-fold increase in the EPS productivity (189.3 ± 4.8 mg L-1 d-1, n=2) compared to the screening experiment. In N. foliaceum, multi-factor optimisation of light intensity, temperature and glucose concentration resulted in an EPS concentration of 0.70 ± 0.04 g L-1 (n=3) on day 14, corresponding to an EPS productivity of 49.7 ± 2.8 mg L-1 d-1 (n=3), which represented a 4-fold increase compared to the screening experiment. The combination of these three factors in a multi-optimisation is novel and represents the first approach of its kind.
Scaling-up EPS production of C. brevissima in 1-litre photobioreactors (PBRs) with CO2-supplemented phototrophic growth increased biomass productivity to 361.8 ± 34.4 mg L-1 d-1 (n=2), corresponding to a dry cell weight of 2.53 ± 0.24 g L-1 (n=2) on day 7. However, EPS productivity decreased substantially compared to shake flasks, remaining below 45.9 ± 3.1 mg L-1 d-1 (n=2), with EPS concentrations of less than 0.51 ± 0.23 g L-1 (n=2). Airflow rate, CO2 flow rate, and light colour were optimised, and modifications to maintain axenicity addressed some PBR limitations, yet EPS production remained low.
Market analysis highlighted the growth potential for EPS-based bioemulsifiers within the expanding 4.70 billion USD emulsifier market, emphasising advantages such as biodegradability and low toxicity. A screening level analysis of the techno-economics of an industrial EPS production process revealed the PBRs and lights as major cost drivers, causing 86% of equipment cost and 78% of the electricity costs. This techno-economic assessment is the first-of-its-kind. From various EPS production scenarios, outdoor production in bag PBRs using natural light and mixotrophic (aeration and glucose) conditions emerged as the only profitable scenario. This scenario led to a net present value (NPV) of 42,600,000 USD and a profitability index (PI) of 2.4. The resulting minimum selling price of 12 USD kg-1 EPS was below a similar commercial product, a seaweed-based bioemulsifier (73 USD kg-1), but above lecithin (8.99 USD kg-1) and Tween 20 (1.64 USD kg-1). A cosmeceutical alternative gave a PI of 7.4 and an NPV of 892 million USD, which was about three-fold and seven-fold higher respectively.
This PhD thesis demonstrates the potential of underexplored cyanobacterial species in producing functional EPS, and suggests that, while bioemulsifier production faces economic challenges, the development of high-value cosmeceuticals may offer more promising opportunities for future research and commercialisation.
Item Type
ethesis
Thesis Type
PhD
Supervisors
Kourmentza, Constantina
University of Nottingham, UK
Mckechnie, Jon
University of Nottingham, UK
Wang, Yanming
University of Nottingham, UK
Subjects (LC)
Associated Schools / Departments
UoN Repository URI
Except where otherwise noted, this item's license is described as
File(s)![Thumbnail Image]()
Name
ChristineSteffenPhDThesisFinal.pdf
Size
7.16 MB
Format
Adobe PDF
Checksum (MD5)
94936ea903c65b7e97a7a93db56e7b2f