Design and control of a continuum robot with multiple embedded sensors
Publication Date
July 21, 2023
Creator
Abstract
Continuum robots are a type of hyper-redundant manipulator, which is generally structured with multiple small diameter sections and can access and operate in narrow & hazardous environments. This research project aims to explore the shape-sensing technology and feasible control strategy for a multiple-section continuum robot system, to solve the control challenge introduced by the hyper-redundancy (i.e., the number of actuators is less than the number of DOFs) and coupled motion (i.e., for the robot with more than one section).
Through this work, a hybrid sensing system is developed and implemented in a prototype continuum robot, with a two-level closed-loop controller developed and a vision-aided led-by-the-tip navigation strategy proposed based on it. This sensing solution consists of a dual displacement sensor system and a self-carried visual tracking system. The former works to measure the cable displacement error at the actuation pack and predict the cable elongation in the arm structure. The latter equips the robot with several camera-marker arrays along the arm and a head camera at the distal tip, providing section-by-section tip tracking and visual perception for the robot controller. Integrated with the two-level closed-loop controller, the whole system is designed to minimize control error in both joint-space and task space. Further, an adaptive led-by-the-tip navigation strategy is proposed to navigate the robot arm into confined space, with a head camera observing the working environments. Under this work frame, the robot can snake its way through narrow channels and perform environmental interactive tasks such as obstacle avoidance and object detection.
All the works were demonstrated on a two-section cable-driven continuum robot with a rotary actuation system design, mounted in a linear rail to provide feed-in motion. Each section is 120 mm long and allows 2-Dof motion in 3-D space. It was shown that the measurement error of the proposed self-carried visual tracking system is smaller than 2 mm, with a mean error of 0.67 mm within the workspace of a 120 mm single section. The distal-tip control accuracy of the 2-section prototype robot can achieve 1.72 mm in the world coordinate (in the X-Y plane), which reduces the tip control error by 73.5% compared with the conventional PCC (piecewise constant curvature) model-based controller, for both smooth and sharp movements. In open-space navigation tasks, along a 240 mm guiding path, the robot achieved an average trajectory error of 3.5 mm with a tip-following deviation of 2.5 mm. Then, the robot is navigated into a mock-up with boundaries and obstacles to demonstrate its capability for online obstacle detection and motion planning. These experiments validate the feasibility and reliability of the sensing system and controller architecture proposed in this study.
Item Type
ethesis
Thesis Type
PhD
Supervisors
Keywords
Subjects (LC)
Associated Schools / Departments
Faculty of Engineering
eprints ID
73765
UoN Repository URI
Except where otherwise noted, this item's license is described as
File(s)![Thumbnail Image]()
Name
Final_Design and Control of a Continuum Robot with Multiple Embedded Sensors.pdf
Type
Full-text
Description
Examined
Size
7.96 MB
Format
Adobe PDF
Checksum (MD5)
c73713c767a8ead28511021a72150569