Synthesis, characterization and performance evaluation of advanced carbon materials for CO2 capture application
Publication Date
July 18, 2024
Creator
Abstract
The synthesis of sustainable functional carbon materials has received increasing interest due to the soaring demand and wide-ranging applications, particularly within the evolving landscape of future energy and chemical industries. These industries are currently undergoing a dramatic transformation towards achieving net-zero emissions by 2050. Over the past two decades, there has been significant development in utilizing biomass, notably forestry residue, as a non-fossil renewable replacement feedstock to produce both classical and advanced carbon materials. However, concerns about sustainability and environment/climate benefits are growing due to deforestation primarily driven by excessive exploitation of forest resources for carbon materials and bioenergy production. Therefore, there is a pressing need, and indeed a desire, to explore and utilise other naturally abundant and more renewable biomass feedstock for sustainable carbon materials manufacturing with improved whole life cycle benefits. This PhD research project examines the use of more sustainable biomass and non-biomass wastes for manufacturing functional carbon materials through a simple and low-energy chemical activation process. The examined materials include kraft lignin waste, eucalyptus wood, cellulose, and plastic polyvinyl chloride wastes. Among various potential energy-related applications, the performance of the prepared carbon materials for CO2 capture applications was evaluated due to the recognized desirable characteristics of carbon materials for CO2 adsorption, including cost-effectiveness, rapid adsorption kinetics, moderate heat of adsorption, and exceptional thermo-oxidative stability.
The research demonstrates that the bio-carbon materials derived from kraft lignin (KL) waste, through an integrated carbonization-activation process, exhibited well-developed ultra-microporous structures with predominant pore sizes generally well below 1 nm. Additionally, a pre-oxidation treatment was employed to tailor the structure and surface chemistry of kraft lignin, aiming to increase the carbon yield and optimize the pore structure of activated carbons. The results showed that distinctive hierarchical ultra-micro/mesoporous structures with narrow bimodal pore size distributions were observed in the pre-oxidized lignin prepared under mild activation conditions. The best performing KL carbon achieved a fully reversible record high CO2 adsorption capacity of 2.01 mmol/g, with an exceptional CO2/N2 selectivity of 33 at 25 oC and 15 kPa CO2, despite its modest surface area of just 878 m2/g and total pore volume of 0.372 cm3/g. Further examination of carbon samples by correlation between their CO2 adsorption capacities and critical pore volume revealed that up to 50% of the total CO2 uptake at low CO2 patrial pressures was attributable to the unique strongly polarizing surface chemistry. Characterization by XRD and XRF demonstrated that such unique surface chemistry appears to be induced by the intercalated potassium in the form of extra-framework cations during KOH activation.
Activated carbon materials derived from eucalyptus wood were prepared using a methodology involving hydrothermal carbonization coupled with KOH activation in this study. Characterisations showed that these carbons were marked by a high level of ultra-microporosity and a strongly polarizing surface. The evaluation of CO2 adsorption behavior indicated that the carbons prepared under mild activation conditions (600 oC, KOH/hydrochar mass ratio of 2) using the HTC char produced at 220 oC possessed an exceedingly high CO2 uptake of 1.91 mmol/g at 25 oC and 15 kPa with slightly higher CO2/N2 selectivity (35) compared to those carbons derived from KL. The outstanding CO2 adsorption performance at low CO2 partial pressures was found to be the highest ever reported for bio-carbons prepared using HTC hydrochar, thanks to their high ultra-micropore (<0.40 nm) volume (0.160 cm3/g) and distinctive surface chemistry dominated by the enhanced formation of extra- framework potassium cations. Moreover, under the same activation conditions, carbons prepared from HTC hydrochar were found to have a 20% higher CO2 adsorption capacity than those prepared without HTC pre-treatment, indicating the great efficacy of HTC in tailoring the biomass precursor in favour of the formation of ultra-microporosity during the KOH chemical activation. The phenomenon is presumably attributed to the denser and more ordered texture structures of the Eucalyptus hydrochar formed as a result of the dehydration, decarboxylation, condensation and potential aromatisation reactions that can occur during hydrothermal carbonization.
The use of polyvinyl chloride (PVC) plastic wastes to prepare advanced carbon materials has also been successfully achieved through hydrothermal co-carbonization (co-HTC) with biomass, coupled with chemical activation. The research demonstrates that, due to a synergistic effect, the hydrothermal co-processing of PVC and biomass wastes significantly improved the efficiency of the PVC dechlorination, leading to the formation of high-quality co-hydrochars precursor for the production of carbon materials. The results showed that the dechlorination efficiency could be increased by 50% when PVC was co-processed with kraft lignin waste at a mild HTC temperature of 220 oC. Meanwhile, by controlling the synthetic conditions such as HTC temperature, activation temperature and KOH/hydrochar mass ratio, the carbon materials prepared from using co-hydrochars exhibited rarely seen large ultra-micropore volumes (i.d. < 0.40 nm) of up to 0.171 cm3/g, which is 61% higher than that of PVC-derived carbons prepared under the same conditions. Adsorption characterisations demonstrate that the ultra-microporous PVC/biomass-derived carbon materials gave rise to CO2 uptake capacities of up to 2.00 mmol/g at 15 kPa CO2 and 25 oC, which are significantly higher compared to those of many “designer” carbon materials prepared from using pristine woody biomass and polymeric precursor materials.
Our findings clearly demonstrated that exceptional CO2 adsorption performance can be achieved using low-cost waste materials derived carbons prepared through chemical activation coupled with designated pre-treatment protocols (pre-oxidation, hydrothermal carbonization and co-carbonization). The CO2 uptake capacities of carbons derived from kraft lignin, eucalyptus wood and PVC/biomass wastes can reach up to 2.01, 1.91 and 2.00 mmol/g at 15 kPa CO2 and 25 oC, respectively, which outperform most of biomass derived activated carbons developed so far. The outcomes of the PhD research bode extremely well for the promising use of abundantly available non-forestry biomass and hard-to-process plastic wastes as more sustainable feedstock to produce high-value functional carbon materials with greater environmental/climate and economic benefits.
Item Type
ethesis
Thesis Type
PhD
Supervisors
Subjects (LC)
Associated Schools / Departments
Department of Chemical and Environmental Engineering (UK)
eprints ID
76858
UoN Repository URI
Except where otherwise noted, this item's license is described as
File(s)![Thumbnail Image]()
Name
Synthesis, characterization and performance evaluation of advanced carbon materials for CO2 capture application - Mengbin Li.pdf
Type
Full-text
Description
Examined
Size
9.84 MB
Format
Adobe PDF
Checksum (MD5)
01723d19cb2c5c70318117aa290f9f37